Home / Products / Alloy Powder / 3D Printing
3D Printing
Metal 3D printing methods like PBF, DED, SLM, EBM, and Binder Jetting require powders with precise size and flowability. These properties affect part quality, cost, and post-processing. Built layer by layer, these processes enable complex geometries beyond the reach of traditional manufacturing.
Cobalt-Based Powder
| Alloy | Composition | Size (µm) | HRC | Data Sheet |
|---|---|---|---|---|
| TMP 06 | Co-30Cr-4.5W | -53/+15, -106/+45 | 42 |  |
| TMP 21 | Co-28Cr-5.5Mo | -53/+15, -106/+45 | 26 | |
| TMP 31 | Co-26Cr-10.5Ni | -53/+15 | 32 | |
| TMP F (32) | Co-26Cr-22.5Ni | -53/+15 | 43 | |
Iron-Based Powder
| Alloy | Composition | Size (µm) | HRC | Data Sheet |
|---|---|---|---|---|
| TMPF 316L | Fe-18Cr-13Ni | -53/+15, -106/+45 | – | |
| TMPF 174PH | Fe-16.5Cr-4Ni | -53/+15, -106/+45 | – | |
Nickel-Based Powder
| Alloy | Composition | Size (µm) | HRC | Data Sheet |
|---|---|---|---|---|
| TMPN625 | Ni-21.5Cr-9Mo | -53/+15, -106/+45 | 25 | |
| TMPN718 | Ni-19Cr-19Fe | -53/+15, -106/+45 | 40 | |
| TMP T-700 | Ni-32Mo-16Cr | -53/+15 | 54 | |
